High-Quality LXYK-50 Oil/gas/alcohol Automatic heating equipment
CHINESE FACTORY Intelligent Greenhouse heating equipment
Product characteristics:
Material: special stainless steel, high thermal effect, long life; shell is galvanized plate paint, beautiful and corrosion resistant;
Environmental controller: using intelligent control, accurate temperature control, flame, pressure, furnace temperature and other detection and protection functions;
According to the actual requirements: diesel fuel, alcohol-based fuel, natural gas, liquefied gas various applicable fuel; special aluminum alloy fan, configuration
It is suitable for flower seeding greenhouse, breeding, factory workshop warming, but also suitable for food and workers Multi-field drying.
1. Instructions for the use of the burner:
Turn on the power supply, the combustion motor starts, the electric spark occurs between the ignition electrodes, after about 13 seconds of pre-blowing, the oil The pump solenoid valve opens automatically, and the oil spray from the nozzle is ignited by the electric spark to form a flame. At this point, the flame detector felt the Flame brightness, the controller enters the locked state. The ignition electrode again delays the ignition for about 15 seconds to stop the ignition, and the burner enters normal operative mode.
2. Matters to be paid attention to when using the burner.
(1) Connect the peripheral circuit and connect the control system to automatically control the boiler temperature, pressure and water level.
(2) The suction pipe shall not be close to the bottom of the tank and keep a distance of 80-120mm.
3. The size of the air valve should match the size of the nozzle. When the burner is used, adjust the boiler and burner from the factory The furnace is not consistent, so it generally needs to adjust the air valve appropriately, and sometimes replace the nozzle with appropriate specifications and injection Angle.
4. The ambient temperature of the burner shall not exceed 70℃, otherwise, cooling and heat insulation measures shall be taken. Used in the colder areas Appropriate insulation measures should be taken for the oil storage device and the oil supply and return pipeline system to prevent the oil road from freezing and blocking. At the same time, burning The burner control circuit part shall not be subject to damp or high temperature. Turn off the burner when cleaning the chimney.
5. The motor should pay attention to moisture-proof and avoid use in a wet environment.
6. The burner should be balanced during installation, and should be used horizontally or vertically to avoid inclined use.
7. When it is not convenient to directly operate the burner, the external control switch and electrical protection device should be connected.
Hot Tags: Fuel Heating Equipment, China, manufacturers, factory, customized, wholesale, low price, high quality
